Home
VP00 Min Series Modular Venturi Vacuum Generator
The VP00 Min Series air-powered venturi vacuum generators are highly efficient, capable of reaching 28"Hg [948mbar], and dirt tolerant. The VP00s use minimal compressed air and include a silencer for quiet operation. Lightweight and compact, they easily mount close to the vacuum point for fast response.
Designed for point-of-use installation: the VP00 Series vacuum generators offer a high vacuum venturi in several compact, lightweight configurations that are ideal for small part pick and place applications. Other common applications include fast evacuation of small vessels for purging operations and water/air analyzers. These compact generators require little installation space and can be positioned close to the vacuum point for fast response.
Need a crossover for a competitor's product? Call Vaccon for help in choosing an equivalent model. Configure / Purchase
Designed for point-of-use installation: the VP00 Series vacuum generators offer a high vacuum venturi in several compact, lightweight configurations that are ideal for small part pick and place applications. Other common applications include fast evacuation of small vessels for purging operations and water/air analyzers. These compact generators require little installation space and can be positioned close to the vacuum point for fast response.
Need a crossover for a competitor's product? Call Vaccon for help in choosing an equivalent model. Configure / Purchase
|
Features & Benefits
|
 VP00 generator shown with optional VSMN-QD-6 vacuum switch |
- Factory installed miniature vacuum switches or sensors with quick disconnect for reliable part detection
- ST2 (straight–through) silencer allows ingested debris to exit the generator without clogging
- G port threads for metric machines – an “I” prefix designates products with metric threads
- Choice of operating pressures to meet machine and factory air supply 80 PSI [5.5 bar] standard, 60 PSI [4.1 bar] optional
Standard Specifications
| VP01BV Generator Standard Specifications | |
| Generator Material: | Anodized Aluminum (for silencer material see Silencer Page) |
| Cartridge Material: | Nylon, Buna O-Ring O-rings available in additional materials - Consult factory for availability |
| Medium: | Filtered (50 micron) un-lubricated, non-corrosive dry gases |
| Operating Temperature: | -30° to ~250°F [-34° to ~121°C] |
| Operating Pressure: | 80 PSI [5.5 bar] or 60 PSI [4.1 bar]- Consult Factory for other operating pressures |
Performance Level Designations:
| “M” | 0-20”Hg, [0 to 677mbar] for medium vacuum/high flow applications |
| “H” | 0-28”Hg, [0 to 948mbar] for high vacuum/standard flow applications |
VP00 Min Series Operating and Installation Requirements
| Supply Line: | Min. 5/32” [4mm], 1/4” O.D. [6mm] tube preferred for lines exceeding 3’ [1M] |
| Control Valve: | 3 way (faster part release), minimum orifice - 0.062” diameter [1.57mm] |
| Vacuum Line: | 1/4” [6mm] tube preferred, for short runs 5/32” [4mm] may be used |
| Vacuum Line Filtration: | Typically vacuum filters are not required, if desired Vaccon recommends model VF125LPM (see In-Line Filter Page) |
| Mounting: | Mounting holes accept 4-40 or M3 screws |
Dimensional Data
Dimensional data for the VP00 series venturi vacuum generator is presented in 2D drawings, with all critical dimensions and port thread sizes displayed. Both imperial and metric units are included.VP00 Min Series Venturi Vacuum Generator dimensional data
Performance Data
Performance data for the VP00 series venturi vacuum generator is displayed, listing air consumption, vacuum flow at various vacuum levels, and evacuation times (for 1 cu. ft. or 1 L volumes). Data is presented in tabular and graphed formats, in both imperial and metric units.VP00 Min Series Venturi Vacuum Generator performance data
