Home
VP0X / VP0X-ADJ Min Series Fastbreak Miniature Venturi Vacuum Generator
VP0X & VP0X-ADJ air-powered venturi vacuum generators are trusted for accurate part placement and rapid part release. The reliable Fastbreak Min Series provides both vacuum and blow-off in one compact generator. Only one compressed air line provides both vacuum and blow-off, with no electricity required.
The integrated pneumatic high-speed blow-off on the VP0X generator provides a fixed-duration blow-off, based on the volume of the housing. With the VP0X-ADJ adjustable generator, you can control the intensity of the blow-off using one fingertip adjustment knob. (Customer-supplied directional control valve with exhaust required.)
Need a crossover for a competitor's product? Call Vaccon for help in choosing an equivalent model. Configure / Purchase
The integrated pneumatic high-speed blow-off on the VP0X generator provides a fixed-duration blow-off, based on the volume of the housing. With the VP0X-ADJ adjustable generator, you can control the intensity of the blow-off using one fingertip adjustment knob. (Customer-supplied directional control valve with exhaust required.)
Need a crossover for a competitor's product? Call Vaccon for help in choosing an equivalent model. Configure / Purchase
|
Features & Benefits
|
VP0X-ADJ generator shown with optional VSMP-QD-6 vacuum switch
|
Ideal Applications
- Small part pick & place for applications requiring accurate part placement and rapid part release:
- Integrated circuits
- Packaging machines
- High speed labeling machines
- Sheet feeders
- Robotic end effectors
- Automated assembly
- ADJ version allows the user to set the intensity of the blow-off from no blow-off to full blow-off
- Factory installed miniature vacuum switches or sensors with quick disconnect for reliable part detection
- ST2 (straight–through) silencer allows ingested debris to exit the generator without clogging
- G port threads for metric machines – an “I” prefix designates products with metric threads
- Choice of operating pressures to meet machine and factory air supply 80 PSI [5.5 bar] standard, 60 PSI [4.1 bar] optional
Standard Specifications
| VP0X / VP0X-ADJ Min Series Generator Standard Specifications | |
| Generator Material: | Anodized Aluminum, Nebar, Brass, Buna-N, Vinyl, Nylon, Alloy Steel (for silencer material see Silencer Page) |
| Cartridge Material: | Nylon, Buna O-Ring O-rings available in additional materials - Consult factory for availability |
| Medium: | Filtered (50 micron) un-lubricated, non-corrosive dry gases |
| Operating Temperature: | 32° to ~125°F [0° to ~52°C] |
| Operating Pressure: | 80 PSI [5.5 bar] or 60 PSI [4.1 bar] – Consult Factory for other operating pressures |
| Cycle Rates: | Up to 900/min |
| Blow-off Response Time: | Instantaneous |
| Orientation: | Any position |
| Blow-off Duration: | 100 milliseconds (based on system design) |
Performance Level Designations:
| “M” | 0-20”Hg, [0 to 677mbar] for medium vacuum/high flow applications |
| “H” | 0-28”Hg, [0 to 948mbar] for high vacuum/standard flow applications |
VP00 Min Series Operating and Installation Requirements
| Cartridge Size: | CM60 (M or H) |
| Supply Line: | Min. 5/32” [4mm], 1/4” O.D. [6mm] tube preferred for lines exceeding 3’ [1M] |
| Control Valve: | 3 way/2 position, minimum orifice - 0.093” diameter [2.5mm] |
| Vacuum Line: | 1/4” [6mm] tube preferred, for short runs 5/32” [4mm] may be used |
| Vacuum Line Filtration: | Typically vacuum filters are not required, if desired Vaccon recommends model VF125LPM (see In-Line Filter Page) |
| Mounting: | Mounting holes accept 4-40 or M3 screws |
Dimensional Data
Dimensional data for the VP0X & VP0X-ADJ series venturi vacuum generator is presented in 2D drawings, with all critical dimensions and port thread sizes displayed. Both imperial and metric units are included.VP0X Min Series dimensional data
Performance Data
Performance data for the VP0X Min Series venturi vacuum generator is displayed, listing air consumption, vacuum flow at various vacuum levels, and evacuation times (for 1 cu. ft. or 1 L volumes). Data is presented in tabular and graphed formats, in both imperial and metric units.VP0X Min Series Performance Data
