VP2X & VP2X-ADJ / VP2XBV & VP2XBV-ADJ Mid Series Fastbreak Venturi Vacuum Generator
VP2X Series air-powered venturi vacuum generators are trusted for accurate part placement and rapid part release. The reliable Fastbreak Mid Series provides both vacuum and blow-off in one generator, using only one compressed air line. No electricity required.
The integrated pneumatic high-speed blow-off on the VP2X generator provides a fixed-duration blow-off, based on the volume of the housing. With the VP2X-ADJ adjustable vacuum generator, you can control the intensity of the blow-off using one fingertip adjustment knob. (Customer-supplied directional control valve with exhaust required).
VP2XBV and VP2XBV-ADJ generators offer an optional 2-way integrated valve. For applications where you need to control the duration of the blow-off, please see the VP35 Series page.
Need a crossover for a competitor's product? Call Vaccon for help in choosing an equivalent model. Configure / Purchase
The integrated pneumatic high-speed blow-off on the VP2X generator provides a fixed-duration blow-off, based on the volume of the housing. With the VP2X-ADJ adjustable vacuum generator, you can control the intensity of the blow-off using one fingertip adjustment knob. (Customer-supplied directional control valve with exhaust required).
VP2XBV and VP2XBV-ADJ generators offer an optional 2-way integrated valve. For applications where you need to control the duration of the blow-off, please see the VP35 Series page.
Need a crossover for a competitor's product? Call Vaccon for help in choosing an equivalent model. Configure / Purchase
Features & Benefits
|
![]() VP2X-ADJ generator shown with optional SX-4 mechanical vacuum switch and valve |
Ideal Applications
- Pick & place for applications requiring accurate part placement and rapid part release
- Palletizing
- Packaging machines
- High speed labeling machines
- Sheet feeders
- Robotic end effectors
- Automated assembly
- ADJ version allows the user to set the intensity of the blow-off from no blow-off to full blow-off
- Interchangeable venturi cartridges – 11 different performance levels
- 2-way Integrated valve - 24VDC, normally closed
- Factory-installed miniature vacuum switches or sensors with quick disconnect for reliable part detection
- Silencers – ST4 (straight-through) silencer won’t clog, or STAA4 silencers for ultra quiet operation
- G port threads for metric machines – an “I” prefix designates products with metric threads
- Choice of operating pressures to meet machine and factory air supply 80 PSI [5.5 bar] standard, 60 PSI [4.1 bar] optional
Standard Specifications
VP2X & VP2X-ADJ / VP2XBV & VP2XBV-ADJ Mid Series Generator Standard Specifications | |
Generator Material: | Anodized Aluminum, Nebar, Brass, Buna-N, Vinyl, Nylon, Alloy Steel (for silencer material see Silencer Page) |
Cartridge Material: | Nylon, Buna O-Ring O-rings available in additional materials - Consult factory for availability |
Medium: | Filtered (50 micron) un-lubricated, non-corrosive dry gases |
Operating Temperature: | 32° to ~125°F [0° to ~52°C] |
Operating Pressure: | 80 PSI [5.5 bar] or 60 PSI [4.1 bar] – Consult Factory for other operating pressures |
Cycle Rates: | Up to 900/min |
Blow-off Response Time: | Instantaneous |
Orientation: | Any position |
Blow-off Duration: | 100 milliseconds (based on system design) |
Performance Level Designations:
“L” | 0-10”Hg, [0 to 339mbar] for low vacuum/high flow applications |
“M” | 0-20”Hg, [0 to 677mbar] for medium vacuum/high flow applications |
“H” | 0-28”Hg, [0 to 948mbar] for high vacuum/standard flow applications |
VP2XBV / VP2XBV Optional 2-Way Valve Specifications
Valve Type: | Axial 2-Way Solenoid Valve, Normally closed |
Valve Body Material: Aluminum, Buna-N | Brass, Aluminum, Buna-N |
Valve Operating Pressure: | Vacuum to 120 PSI [-1 to 8 bar] |
Electrical: | 24 VDC [-15% to +10% Nominal] |
Power Consumption: | 4 watts |
Response Time: | 6 milliseconds |
Cycle Rate: | 80 cycles/second |
Average Life: | 100 million cycles |
Electrical Connection: | Fixed leads, 24 AWG, 18” [457.2mm], optional M8 3-pin connector |
LED Indicator: | Yes |
M8 3-pin Connection: | Yes, optional |
Cartridge Size: | C60 (M, H) and C90 (L, M, H) | C100 (L, M, H) and C150 (L, M, H) |
Supply Line: | 1/4” O.D. [6mm] tube | 3/8” O.D. [10mm] tube |
Vacuum Line: | 1/4” O.D. [6mm] tube | 3/8” O.D. [10mm] tube |
Vacuum Line Filtration: | Typically vacuum filters are not required, if desired Vaccon recommends model VF125LPM for the VP2X/VP2XBVand model VF250LPM for the VP1X/VP2XBV-ADJ (see In-Line Filter Page) | |
Control Valve: | 3 way / 2 position (faster part release), minimum orifice – 0.125 I.D. [3 mm] | |
Mounting Screws: | Mounting holes accept 4-40 [M3] screws |
Dimensional Data
Dimensional data for the VP2X/2XBV & VP1X/2XBV-ADJ Mid Series venturi vacuum generators is presented in 2D drawings, with all critical dimensions and port thread sizes displayed. Both imperial and metric units are included.VP2X / VP2X-ADJ / VP2XBV / VP2XBV-ADJ Mid Series dimensional data
Performance Data
Performance data for the VP1X & VP1X-ADJ Mid Series venturi vacuum generator is displayed, listing air consumption, vacuum flow at various vacuum levels, and evacuation times (for 1 cu. ft. or 1 L volumes). Data is presented in tabular and graphed formats, in both imperial and metric units.VP2X & VP2X-ADJ / VP2XBV & VP2XBV-ADJ Mid Series Performance Data