Download PDF of this page  Print this page

High Vacuum Venturi Vacuum Generators

Vaccon’s HVP HighVac Series venturi vacuum generators
Vaccon’s HighVac Series venturi vacuum generators offer the highest vacuum level performance available with any air-operated generator. The HighVac Series of generators are capable of delivering vacuum levels up to 29.5”Hg [999mbar] at 3 vacuum flow rates.

The high vacuum level and compact size of the HVP generator allows you to incorporate smaller and more efficient components in your design. Often used to replace expensive, noisy, heat generating electric generators, HVP generators are quiet and maintenance free, ideal for small shops, labs and recharging HVAC systems.
Please Note: Vacuum Level = the magnitude of suction created by the vacuum generator. Vacuum level is affected by elevation and barometric pressure. For each 1,000 feet of elevation, the ultimate vacuum level that the generator can achieve decreases by approximately 1” Hg [22.9mbar]. For example, a HVP generator operating in Denver, Colorado at an altitude of approximately 1 mile [5280 feet] will only be capable of achieving a vacuum level of approximately 24.5” Hg [561mbar]

Need a crossover for a competitor's product? Call Vaccon for help in choosing an equivalent model. Configure / Purchase

Features & Benefits

  • High performance – powerful vacuum up to 29.5"Hg [999mbar]
  • Fast response time – no delay due to long plumbing lines; mounts in-line and installs
    close to vacuum point
  • Efficient minimal air consumption
  • Compact, lightweight and modular – easy to install
  • Safe operation – no electricity needed at the generator
  • Reliable – operates trouble-free:

HVP Series generators provide up to
29.5" [999 mbar] vacuum level
Ideal Applications
  • Process control
  • Vessel evacuation
  • HVAC applications
  • Deagassing

Standard Specifications

HVP HighVac Generator Standard Specifications
Body Material: Anodized Aluminum (for silencer material see Silencer Page)
Cartridge Material: Nylon, Buna O-Ring
O-rings available in additional materials - Consult factory for availability
Medium: Filtered (50 micron) un-lubricated, non-corrosive dry gases
Operating Temperature: -30° to ~250°F [-34° to ~122°C]
Operating Pressure: 80 PSI [5.5 bar] or 60 PSI [4.1 bar] – Consult Factory for other operating pressures
HVP HighVac Series Operating and Installation Requirements
Vacuum & Supply Line HVP 100/200: 3/8” O.D. [10mm] tube
Vacuum Line Filtration HVP 100/200: Typically vacuum filters are not required, if desired Vaccon recommends model VF250F (see In-Line Filter Page)
Vacuum & Supply Line HVP 300: 3/8” O.D. [10mm] tube
Vacuum Line Filtration HVP 300: Typically vacuum filters are not required, if desired Vaccon recommends model VF375F (see In-Line Filter Page)
Mounting Screws: HVP 100/200: 4-40 [M3], HVP 300: 10-32 [M5]

Dimensional Data

Dimensional data for the HVP HighVac Series Venturi Vacuum Generators is presented in 2D drawings, with all critical dimensions and port thread sizes displayed. Both imperial and metric units are included.

HVP High Series Dimensional Data 


Performance Data

Performance data for the HVP HighVac Series Venturi Vacuum Generators is displayed, listing air consumption, vacuum flow at various vacuum levels, and evacuation times (for 1 cu. ft. or 1 L volumes). Data is presented in tabular and graphed formats, in both imperial and metric units.

HVP Series Performance Data 

3D Cad Files
Custom Products