Download PDF of this page  Print this page

I-MPVG Series Inline Miniature Plastic Vacuum Generator

I-MPVG Series Inline </br>Miniature Plastic Vacuum Generators

Vaccon’s I-MPVG Series of miniature plastic vacuum generators are lightweight, high performance up to 27"Hg [918mbar] and offer easy point-of-use installation. These single-stage venturi generators offer a simple compact design and are the same size as the air supply and vacuum lines allowing installation in the tightest spaces. The I-MPVG-B and I-MPVG-T models contain a built-in silencer. All I-MPVG Series generators are metric only.

The I-MPVG Series feature a single-stage design with no moving parts to wear out. Vaccon dirt tolerant generators don’t require costly filters or screens to maintain their maintenance-free operation, eliminating downtime and increasing productivity. Simply supply compressed air and vacuum lines to the generator – push-to-connect fittings provide quick and simple connections.

Need a crossover for a competitor's product? Call Vaccon for help in choosing an equivalent model. Configure / Purchase

Features & Benefits

  • Lightweight and compact for easy point-of-use installation
  • Integrated mounting holes
  • Built-in silencers
  • Push-to-connect fittings [6mm] speed installation
  • Fast response – installs close to vacuum point
  • Efficient – minimal air consumption
  • Safe operation – no electricity needed at the generator
  • Reliable – operates trouble-free:
    • No moving parts to wear or clog
    • No flap valves to stick open
    • No maintenance
    • No downtime
Ideal Applications
  • Pick & Place of small to medium sized parts
  • Robotic End-of-Arm Tooling
  • Vacuum clamping / holding fixtures
  • Vessel evacuation
  • Gas sampling for analysis
  • Leak testing
Generator Options
  • 3 different models (metric thread only)
  • Up to 27.1” vacuum level
  • Up to 1.3 SCFM [39 LPM] vacuum flow
  • 2 different vacuum levels for I-MPVG-B and MPVG-T models
  • Integral mounting holes (I-MPVG-B and MPVG-T models)
  • I-MPVG-I-18M vacuum port has G 1/8 threads for installation on End-of-Arm tool or panel mounting

Standard Specifications

I-MVPG Inline Generator Standard Specifications
Generator Material: Anodized Aluminum, Buna-N O-ring, Nylon
Medium: Filtered (50 micron) un-lubricated, non-corrosive dry gases
Operating Temperature: -30° to ~250F [-34° to ~121°C]
Operating Pressure: 72 PSI [5.0 bar]
Performance Level Designations
I-MPVG-B models 27.1”Hg [918mbar] for high vacuum / standard flow applications
I-MPVG-T & I-MPVG-I models 26.8”Hg [908mbar] for high vacuum / standard flow applications
I-MPVG Inline Generator Operating and Installation Requirements
Supply Line: 6mm O.D. tube
Vacuum Line: 6mm O.D. tube
Exhaust Valve: 8mm O.D. tube (I-MPVG-T model only)
Vacuum Line Filtration: Typically vacuum filters are not required, if desired Vaccon recommends model VF125LPM (see In-Line Filter Page)

I-MPVG-B Inline Venturi Generator

I-MPVG-T Inline Venturi Generator

I-MPVG-I Inline Venturi Generator

I-MPVG-I-18M Inline Venturi Generator

Dimensional Data

Dimensional data for the I-MVPG Series Inline Venturi Vacuum Generators is presented in 2D drawings, with all critical dimensions and port thread sizes displayed. Both imperial and metric units are included.

Inline I-MPVG Series Dimensional Data 


Performance Data

Performance data for the I-MVPG Series Inline Venturi Vacuum Generators is presented listing air consumption and maximum vacuum level. Data is presented in both imperial and metric units.

Inline I-MPVG Series Performance Data 

3D Cad Files
Custom Products