Home
VPI-90H Inline Venturi Vacuum Generators
Unlike standard venturi vacuum generators where the vacuum port is 90° from the supply port, Vaccon’s air-powered VPI-90H in-line venturi vacuum generators feature an air-supply port and vacuum port on the same axis to consolidate space.
VPI-90H generators vertically mount to robotic arms to create single or densely populated arrays of generator/cup combinations to accommodate and lift products of any size, shape, or weight.
Internal threads on the vacuum port enable vacuum cups to connect directly to the generator while the external threads attach directly to the end of arm tool. VPI-90H’s feature an additional vacuum port for a vacuum switch/sensor to ensure accurate part detection or for a connection to an externally supplied blow-off.
Need a crossover for a competitor's product? Call Vaccon for help in choosing an equivalent model. Configure / Purchase
VPI-90H generators vertically mount to robotic arms to create single or densely populated arrays of generator/cup combinations to accommodate and lift products of any size, shape, or weight.
Internal threads on the vacuum port enable vacuum cups to connect directly to the generator while the external threads attach directly to the end of arm tool. VPI-90H’s feature an additional vacuum port for a vacuum switch/sensor to ensure accurate part detection or for a connection to an externally supplied blow-off.
Need a crossover for a competitor's product? Call Vaccon for help in choosing an equivalent model. Configure / Purchase
|
Features & Benefits
|
 VPI-90H Inline Venturi Vacuum Generator |
Ideal Applications
- Pick & place
- Bottling
- Packaging
- Palletizing
- Robotic/End-of-Arm tooling
- Choice of operating pressures to meet machine and factory air requirements (80 PSI [5.5 bar] standard, 60 PSI [4.1 bar] optional)
- Auxiliary port accommodates optional vacuum sensor or switch with quick disconnect or externally supplied blow-off
- Optional jam nut for ease of mounting
Standard Specifications
VPI-90H Generator Standard Specifications| Generator Material: | Anodized Aluminum, Buna-N O-ring, Nylon |
| Medium: | Filtered (50 micron) un-lubricated, non-corrosive dry gases |
| Operating Temperature: | -30° to ~250F [-34° to ~121°C] |
| Operating Pressure: | 80 PSI [5.5 bar] or 60 PSI [4.1 bar] – Consult Factory for other operating pressures |
| “H” | 0-28”Hg, [0 to 948mbar] for high vacuum/standard flow applications |
VPI-90H Inline Generator Operating and Installation Requirements
| Supply Line: | 1/4“ O.D. tube [6mm] |
| Vacuum Line: | 1/4“ O.D. tube [6mm] |
| Control Valve: | 3-way/2 position (faster part release) – minimum orifice - 0.125” [3mm] |
| Vacuum Line Filtration: | Typically vacuum filters are not required, if desired Vaccon recommends model VF125LPM (see In-Line Filter Page) |
| Mounting Screws: | 5/8-18 UNF male thread (optional jam nut – P/N: add "-JN") |
Dimensional Data
Dimensional data for the VPI-90H Inline Venturi Vacuum Generator is presented in 2D drawings, with all critical dimensions and port thread sizes displayed. Both imperial and metric units are included.VPI-90H Dimensional Data
Performance Data
Performance data for the VPI-90H Inline Venturi Vacuum Generator is displayed, listing air consumption, vacuum flow at various vacuum levels, and evacuation times (for 1 cu. ft. or 1 L volumes). Data is presented in tabular and graphed formats, in both imperial and metric units.VPI-90H Performance Data
