VP10-MP Mid Series Multi-port Venturi Vacuum Generator
Vaccon’s Multi-port venturi vacuum generators combine a venturi with a manifold to distribute vacuum to multiple locations. The result is a compact vacuum generation and distribution system for End-of-Arm Tools and applications where one generator powers multiple cups.
VP10-MP generators have four vacuum ports that distribute vacuum equally to 4 locations with “Home-Run” plumbing. The streamlined design minimizes vacuum loss, maximizes vacuum flow and speeds cycle times for safe, efficient lifting operations.
In addition to the 4 topside vacuum ports, there is an additional port that can be plumbed to a compressed air source to provide a blow-off. The manifold design allows the one compressed air connection to feed blow-off air to all vacuum locations simultaneously, saving the need to plumb a separate blow-off line to each location.
An M5 threaded port allows you to connect a Vaccon miniature vacuum sensor/switch to provide an electrical signal for vacuum achieved/part present and to alert failures.
Need a crossover for a competitor's product? Call Vaccon for help in choosing an equivalent model. Configure / Purchase
VP10-MP generators have four vacuum ports that distribute vacuum equally to 4 locations with “Home-Run” plumbing. The streamlined design minimizes vacuum loss, maximizes vacuum flow and speeds cycle times for safe, efficient lifting operations.
In addition to the 4 topside vacuum ports, there is an additional port that can be plumbed to a compressed air source to provide a blow-off. The manifold design allows the one compressed air connection to feed blow-off air to all vacuum locations simultaneously, saving the need to plumb a separate blow-off line to each location.
An M5 threaded port allows you to connect a Vaccon miniature vacuum sensor/switch to provide an electrical signal for vacuum achieved/part present and to alert failures.
Need a crossover for a competitor's product? Call Vaccon for help in choosing an equivalent model. Configure / Purchase
Features & Benefits
|
![]() VP10-MP generator shown with optional vacuum switch |
- Interchangeable venturi cartridges – 11 different performance levels
- Silencers - ST4 (straight-through) silencers won’t clog, STAA4 silencers for ultra quiet operation
- Miniature sensors or switches with quick disconnect
- G port threads for metric machines – an “I” prefix designates products with metric threads
- Choice of operating pressures to meet machine and factory air supply 80 PSI [5.5 bar] standard, 60 PSI [4.1 bar] optional
Standard Specifications
VP10-MP Generator Standard SpecificationsGenerator Material: | Anodized Aluminum (for silencer material see Silencer Page) |
Cartridge Material: | Nylon, Buna O-Ring, O-rings available in additional materials - Consult factory for availability |
Medium: | Filtered (50 micron) un-lubricated, non-corrosive dry gases |
Operating Temperature: | -30° to ~250°F [-34° to ~121°C] |
Operating Pressure: | 80 PSI [5.5 bar] or 60 PSI [4.1 bar] – Consult Factory for other operating pressures |
Performance Level Designations:
“L” | 0-10”Hg, [0 to 677mbar] for low vacuum/high flow applications |
“M” | 0-20”Hg, [0 to 677mbar] for medium vacuum/high flow applications |
“H” | 0-28”Hg, [0 to 948mbar] for high vacuum/standard flow applications |
VP10-MP Multi-port Mid Series Operating and Installation Requirements
Cartridge Size: | C60 (M, H) and C90 (L, M, H) | C100 (L, M, H) and C150 (L, M, H) |
Supply Line: | 1/4” O.D. [6mm] tube | 3/8” O.D. [10mm] tube |
Vacuum Line: | 1/4” O.D. [6mm] tube | 3/8” O.D. [10mm] tube |
Vacuum Line Filtration: | Typically vacuum filters are not required, if desired Vaccon recommends model VF125LPM (see In-Line Filter Page) | |
Control Valve: | 3 way / 2 position (faster part release), minimum orifice – 0.125 I.D. [3 mm] | |
Mounting Screws: | Mounting holes accept 4-40 [M3] screws |
Dimensional Data
Dimensional data for the VP10-MP MidSeries multi-port venturi vacuum generator is presented in 2D drawings, with all critical dimensions and port thread sizes displayed. Both imperial and metric units are included.VP10-MP Mid Series dimensional data
Performance Data
Performance data for the VP10-MP MidSeries multi-port venturi vacuum generator is displayed, listing air consumption, vacuum flow at various vacuum levels, and evacuation times (for 1 cu. ft. or 1 L volumes). Data is presented in tabular and graphed formats, in both imperial and metric units.Venturi Mid Series Performance Data