VP80-(200,250)-MP / VP80BV-(200,250)-MP Max Series Multi-port Venturi Vacuum Generator
Vaccon’s Multi-port venturi vacuum generators combine a venturi with a manifold to distribute vacuum to multiple locations. The result is a compact and efficient vacuum generation and distribution system for robotic End-of-Arm Tools and applications where one generator powers multiple cups.
VP80-MP generators have 4 vacuum ports that distribute vacuum equally to 4 locations with direct “Home-Run” plumbing. The streamlined design minimizes vacuum loss, maximizes vacuum flow and speeds cycle times for safe, efficient lifting operations.
In addition to the 4 topside vacuum ports, there is a port fitted with a glycerin filled vacuum gauge (standard) and another port that can be plumbed to a compressed air source to provide a blow-off. The manifold design allows one compressed air connection to feed blow-off air to all vacuum locations simultaneously, saving the need to plumb separate blow-off lines.
Need a crossover for a competitor's product? Call Vaccon for help in choosing an equivalent model. Configure / Purchase
VP80-MP generators have 4 vacuum ports that distribute vacuum equally to 4 locations with direct “Home-Run” plumbing. The streamlined design minimizes vacuum loss, maximizes vacuum flow and speeds cycle times for safe, efficient lifting operations.
In addition to the 4 topside vacuum ports, there is a port fitted with a glycerin filled vacuum gauge (standard) and another port that can be plumbed to a compressed air source to provide a blow-off. The manifold design allows one compressed air connection to feed blow-off air to all vacuum locations simultaneously, saving the need to plumb separate blow-off lines.
Need a crossover for a competitor's product? Call Vaccon for help in choosing an equivalent model. Configure / Purchase
Features & Benefits
|
![]() VP80-MP generator shown with optional valve and gauge |
Ideal Applications
- End-of-Arm Tooling/Robotics
- Pick and place
- Flexible manufacturing
- Packaging – carton erecting, robotic palletizing
- Automation assembly
- Interchangeable venturi cartridges – 11 different performance levels
- Silencers - ST4 (straight-through) silencers won’t clog, STAA4 silencers for ultra quiet operation
- Integrated 2-way valve - 24 VDC, normally closed, with optional M8 3-pin connector
(BV valve assembly not available in the "250-H" version) - Miniature sensors or switches with quick disconnect
- G port threads for metric machines – an “I” prefix designates products with metric threads
- Choice of operating pressures to meet machine and factory air supply 80 PSI [5.5 bar] standard, 60 PSI [4.1 bar] optional
Standard Specifications
VP80-(200,250)-MP / VP80BV-(200,250)-MP Generator Standard SpecificationsGenerator and Cartridge Material: | Anodized Aluminum (for silencer material see Silencer Page) |
Medium: | Filtered (50 micron) un-lubricated, non-corrosive dry gases |
Operating Temperature: | -100° to ~400°F [-73° to ~204°C] |
Operating Pressure: | 80 PSI [5.5 bar] or 60 PSI [4.1 bar] – Consult Factory for other operating pressures |
Performance Level Designations:
“L” | 0-10”Hg, [0 to 677mbar] for low vacuum/high flow applications |
“M” | 0-20”Hg, [0 to 677mbar] for medium vacuum/high flow applications |
“H” | 0-28”Hg, [0 to 948mbar] for high vacuum/standard flow applications |
VP80BV-MP Optional 2-Way Valve Specifications
Valve Type: | Axial 2-Way Solenoid Valve, Normally closed |
Valve Body Material: | Brass, Aluminum, Buna-N |
Valve Operating Pressure: | Vacuum to 120 PSI [-1 to 8 bar] |
Electrical: | 24 VDC [-15% to +10% Nominal] |
Power Consumption: | 4 watts |
Response Time: | 6 milliseconds |
Cycle Rate: | 80 cycles/second |
Average Life: | 100 million cycles |
Electrical Connection: | Fixed leads, 24 AWG, 18” [457.2mm], optional M8 3-pin connector |
LED Indicator: | Yes |
Manual Override: | Yes, non-locking, spring return |
M8 3-pin Connection: | Yes, optional |
VP90-(300,350)-MP Multi-port Mid Series Operating and Installation Requirements
Supply Line: | 3.8” O.D. [10mm] tube | ||
Vacuum Line: | 3/8” O.D. [10mm] tube | ||
Vacuum Line Filtration: | Typically vacuum filters are not required, if desired Vaccon recommends model VF375F (see In-Line Filter Page) | ||
Control Valve: | 3 way / 2 position (faster part release), minimum orifice – 0.25 I.D. [6mm] | ||
Mounting Screws: | Mounting holes accept 10-32 or [M5] screws |
Dimensional Data
Dimensional data for the VP80-(200,250)-MP / VP80BV-(200,250)-MP MaxSeries multi-port venturi vacuum generator is presented in 2D drawings, with all critical dimensions and port thread sizes displayed. Both imperial and metric units are included.VP80-MP / VP80BV-MP Max Series Dimensional Data
Performance Data
Performance data for the VP80-(200,250)-MP / VP80BV-(200,250)-MP MaxSeries multi-port venturi vacuum generator is displayed, listing air consumption, vacuum flow at various vacuum levels, and evacuation times (for 1 cu. ft. or 1 L volumes). Data is presented in tabular and graphed formats, in both imperial and metric units.Venturi Max Series Performance Data