Home
VP90-(300,350)-MP Max Series Multi-port Venturi Vacuum Generator
Vaccon’s Multi-port venturi vacuum generators combine a venturi with a manifold to distribute vacuum to multiple locations. The result is a compact and efficient vacuum generation and distribution system for robotic End-of-Arm Tools and applications where one generator powers multiple cups.
VP90-MP generators have 6 vacuum ports that distribute vacuum equally to 6 locations with direct “Home-Run” plumbing. The streamlined design minimizes vacuum loss, maximizes vacuum flow and speeds cycle times for safe, efficient lifting operations.
Need a crossover for a competitor's product? Call Vaccon for help in choosing an equivalent model. Configure / Purchase
VP90-MP generators have 6 vacuum ports that distribute vacuum equally to 6 locations with direct “Home-Run” plumbing. The streamlined design minimizes vacuum loss, maximizes vacuum flow and speeds cycle times for safe, efficient lifting operations.
Need a crossover for a competitor's product? Call Vaccon for help in choosing an equivalent model. Configure / Purchase
|
Features & Benefits
|
MP.jpg) VP90-MP generator shown with optional VTMV-QD-6 vacuum switch |
- End-of-Arm Tooling/Robotics
- Pick and place
- Flexible manufacturing
- Packaging – carton erecting, robotic palletizing
- Automation assembly
- Silencers – ST6A (straight-through) silencers won’t clog, STAA6 silencers for ultra quiet operation
- Miniature sensors or switches with quick disconnect
- G port threads for metric machines – an “I” prefix designates products with metric threads
- Choice of operating pressures to meet machine and factory air supply 80 PSI [5.5 bar] standard, 60 PSI [4.1 bar] optional
Standard Specifications
VP90-(300,350)-MP Generator Standard Specifications| Generator and Cartridge Material: | Anodized Aluminum (for silencer material see Silencer Page) |
| Medium: | Filtered (50 micron) un-lubricated, non-corrosive dry gases |
| Operating Temperature: | -100° to ~400°F [-73° to ~204°C] |
| Operating Pressure: | 80 PSI [5.5 bar] or 60 PSI [4.1 bar] – Consult Factory for other operating pressures |
| “L” | 0-10”Hg, [0 to 677mbar] for low vacuum/high flow applications |
| “M” | 0-20”Hg, [0 to 677mbar] for medium vacuum/high flow applications |
| “H” | 0-28”Hg, [0 to 948mbar] for high vacuum/standard flow applications |
VP90-(300,350)-MP Multi-port Mid Series Operating and Installation Requirements
| Supply Line: | 1/2” O.D. [12mm] tube | ||
| Vacuum Line: | 1/2” O.D. [12mm] tube – 3/4” [22mm] for lines exceeding 3’ [1M] | ||
| Vacuum Line Filtration: | Typically vacuum filters are not required, if desired Vaccon recommends model VF375F (see In-Line Filter Page) | ||
| Control Valve: | 3 way / 2 position (faster part release), minimum orifice – 0.25 I.D. [6mm] | ||
| Mounting Screws: | Mounting holes accept 10-32 or [M5] screws | ||
Dimensional Data
Dimensional data for the VP90-(300,350)-MP MaxSeries multi-port venturi vacuum generator is presented in 2D drawings, with all critical dimensions and port thread sizes displayed. Both imperial and metric units are included.VP90-MP Max Series Dimensional Data
Performance Data
Performance data for the VP90-(300,350)-MP MaxSeries multi-port venturi vacuum generator is displayed, listing air consumption, vacuum flow at various vacuum levels, and evacuation times (for 1 cu. ft. or 1 L volumes). Data is presented in tabular and graphed formats, in both imperial and metric units.Venturi Max Series Performance Data
