All-Pneumatic Pilot Controlled Venturi Vacuum Generators
The all pneumatic VP50 Series are air pilot controlled venturi vacuum generators that feature an integral check valve and air pilot controlled blow-off for rapid part release or vacuum line clean out. Using air pilot control, VP50 Series generators generate vacuum only when needed, minimizing compressed air consumption. The unique, compact design of the VP50 Series allows for easy integration close to the work area for faster response.
There are three versions of the VP50 Series available:
Using air pilot control, VP50 Series generators generate vacuum only when needed, minimizing compressed air consumption. The unique, compact design of the VP50 Series allows for easy integration close to the work area for faster response.
Need a crossover for a competitor's product? Call Vaccon for help in choosing an equivalent model. Configure / Purchase
There are three versions of the VP50 Series available:
VP50 | Air pilot vacuum control and blow-off |
VP50-AS | Integrated air saver circuit, for reduced air consumption and pilot controlled blow-off |
VP50-ASP | Air pilot controlled vacuum with integrated air saver circuit, pilot controlled blow-off and pneumatic signal output for vacuum setpoint notification |
Using air pilot control, VP50 Series generators generate vacuum only when needed, minimizing compressed air consumption. The unique, compact design of the VP50 Series allows for easy integration close to the work area for faster response.
Need a crossover for a competitor's product? Call Vaccon for help in choosing an equivalent model. Configure / Purchase
Features & Benefits
- Compact, lightweight design
- All pneumatic - no electric power required
- Precise control - individual pneumatic connections let you control the vacuum and the blow-off duration time
- Instantaneous vacuum as needed - minimal air consumption
- Accurate part positioning from positive vacuum and rapid blow-off
- Easy installation - modular design speeds installation and minimizes assembly
- Fast response - installs close to vacuum point reducing delay due to long plumbing lines
- Reliable – operates trouble-free:
- No flap valves to stick open
- Automatically cleans vacuum lines
- No maintenance, no downtime
- Pneumatic Pick & Place Systems
- Manual Material Handling Systems
- Vessel Evacuation
- Interchangeable venturi cartridges – 11 different performance levels
- Factory-installed miniature vacuum switches or sensors with quick disconnect for reliable part detection
Standard Specifications
All-pneumatic Pilot Controlled Generator Standard Specifications | |
Generator Material: | Anodized Aluminum, Buna-N, Brass, Acetal (for silencer material see Silencer Page) |
Cartridge Material: | Nylon, Buna O-Ring O-rings available in additional materials - Consult factory for availability |
Check Valve Material: | Polypropylene, Buna-N, Stainless Steel |
Gasket Material: | NEBAR Red |
Medium: | Filtered (50 micron) un-lubricated, non-corrosive dry gases |
Operating Temperature: | -23° to ~122F [-5° to ~50°C] |
Operating Pressure: | 80 PSI [5.5 bar] |
VP50 / VP50-AS / VP50-ASP 3-Way Valve Specifications
Valve Type: | Integral 3-way cartridge, pilot actuated, normally closed |
Valve Body Material: | Brass, Aluminum |
Valve Seat Material: | Buna-N |
Valve Operating Pressure: | 0 to 100 PSI [0 to 7 bar] |
Average Life: | 50 million cycles or better |
“L” | 0-10”Hg, [0 to 339mbar] for low vacuum/high flow applications |
“M” | 0-20”Hg, [0 to 677mbar] for medium vacuum/high flow applications |
“H” | 0-28”Hg, [0 to 948mbar] for high vacuum/standard flow applications |
VP50 / VP50-AS / VP50-ASP Series Operating and Installation Requirements
Cartridge Size: | C60 (M, H) and C90/C100/C150 (L, M, H) | |
Supply Line: | 1/4” O.D. [6mm] tube | |
Vacuum Line: | 3/8” O.D. [10mm] tube | |
Pilot Line: | 5/32” O.D. [4mm] tube | |
Vacuum Line Filtration: | Typically vacuum filters are not required, if desired Vaccon recommends model VF250F (see In-Line Filter Page) | |
Mounting Screws: | 0.21” [5mm] diameter |

Dimensional Data
Dimensional data for the VP50 Series venturi vacuum generators are presented in 2D drawings, with all critical dimensions and port thread sizes displayed. Both imperial and metric units are included.VP50 Series Dimensional Data
Performance Data
Performance data for the VP50 Series venturi vacuum generator is displayed, listing air consumption, vacuum flow at various vacuum levels, and evacuation times (for 1 cu. ft. or 1 L volumes). Data is presented in tabular and graphed formats, in both imperial and metric units.Venturi Mid Series Performance Data