Home
VP35 Mid Series Venturi Vacuum Generator with Solenoid Operated Vacuum and Blow-off
VP35 Mid Series are solenoid-controlled venturi vacuum generators that feature a second solenoid to control blow-off air for rapid part release. VP35 generators generate vacuum only when needed, minimizing compressed air consumption.
Our interchangeable venturi cartridge system allows design flexibility. Choosing from 11 different venturi cartridges, designers can optimize performance to meet their needs.
Lightweight and compact, VP35 generators are placed at the point of use to eliminate plumbing between components and to ensure high cycle rates for increased productivity. Dirt tolerant, vacuum filters are not required. Push-to-connect air supply and vacuum lines save space and assembly time.
Need a crossover for a competitor's product? Call Vaccon for help in choosing an equivalent model. Configure / Purchase
Our interchangeable venturi cartridge system allows design flexibility. Choosing from 11 different venturi cartridges, designers can optimize performance to meet their needs.
Lightweight and compact, VP35 generators are placed at the point of use to eliminate plumbing between components and to ensure high cycle rates for increased productivity. Dirt tolerant, vacuum filters are not required. Push-to-connect air supply and vacuum lines save space and assembly time.
Need a crossover for a competitor's product? Call Vaccon for help in choosing an equivalent model. Configure / Purchase
|
Features & Benefits
|
 VP35 pump shown with optional VTMV-QD-6 vacuum switch and gauge |
Ideal Applications
Pick & place for applications requiring accurate part placement and rapid part release:
- Robotics
- Automated assembly
- Material Handling
- Interchangeable venturi cartridges – 11 different performance levels
- Factory-installed miniature vacuum switches or sensors with quick disconnect for reliable part detection
- ST4 (straight-through) silencer that allows ingested debris to exit the generator without clogging
- G port threads for metric machines – an “I” prefix designates products with metric threads
- Choice of operating pressures to meet machine and factory air supply 80 PSI [5.5 bar] standard,
60 PSI [4.1 bar] optional
Standard Specifications
VP35 Generator Standard Specifications| Generator Material: | Anodized Aluminum, Buna-N, Brass, Acetal (for silencer material see Silencer Page) |
| Cartridge Material: | Nylon, Buna O-Ring - O-rings available in additional materials - Consult factory for availability |
| Medium: | Filtered (50 micron) un-lubricated, non-corrosive dry gases |
| Operating Temperature: | -23° to ~122F [-5° to ~50°C] |
| Operating Pressure: | 80 PSI [5.5 bar] or 60 PSI [4.1 bar] – Consult Factory for other operating pressures |
VP35 Series 2-Way Valve Specifications
| Valve Type: | Axial 2-Way Solenoid Valve, Normally closed |
| Valve Body Material: | Brass, Aluminum, Buna-N |
| Valve Operating Pressure: | Vacuum to 120 PSI [-1 to 8 bar] |
| Electrical: | 24 VDC [-15% to +10% Nominal] |
| Power Consumption: | 4 watts |
| Response Time: | 6 milliseconds |
| Cycle Rate: | 80 cycles/second |
| Average Life: | 100 million cycles |
| Electrical Connection: | 2-pin connector with fixed leads, 24 AWG, 18” [457.2mm], optional M8 3-pin connector |
| LED Indicator: | Yes |
| Manual Override: | Yes, non-locking, spring return |
| M8 3-pin Connection: | Yes, optional |
| “L” | 0-10”Hg, [0 to 339mbar] for low vacuum/high flow applications |
| “M” | 0-20”Hg, [0 to 677mbar] for medium vacuum/high flow applications |
| “H” | 0-28”Hg, [0 to 948mbar] for high vacuum/standard flow applications |
| Cartridge Size: | C60 (M, H) and C90 (L, M, H) | C100 (L, M, H) and C150 (L, M, H) |
| Supply Line: | 1/4” O.D. [6mm] tube | 3/8” O.D. [10mm] tube |
| Vacuum Line: | 3/8” O.D. [10mm] tube | 3/8” O.D. [10mm] tube |
| Vacuum Line Filtration: | Typically vacuum filters are not required, if desired Vaccon recommends model VF250LPM (see In-Line Filter Page) | |
| Mounting Screws: | Mounting holes accept 4-40 [M3] screws | |
Dimensional Data
Dimensional data for the VP35 Mid Series venturi vacuum generators are presented in 2D drawings, with all critical dimensions and port thread sizes displayed. Both imperial and metric units are included.VP35 Mid Series dimensional data
Performance Data
Performance data for the VP35 Mid Series venturi vacuum generator is displayed, listing air consumption, vacuum flow at various vacuum levels, and evacuation times (for 1 cu. ft. or 1 L volumes). Data is presented in tabular and graphed formats, in both imperial and metric units.Venturi Mid Series performance data
