VP10 Mid Series Modular Venturi Vacuum Generator
The VP10 Mid Series air-powered venturi vacuum generators are highly efficient, capable of reaching 28”Hg [948mbar], dirt tolerant, and include a silencer for quiet operation. Lightweight and compact, they can be easily mounted close to the vacuum point for fast response.
All Mid Series generators incorporate Vaccon’s interchangeable venturi cartridge system that allows designers to choose from 11 different cartridge assemblies to optimize generator performance to meet their specific application needs.
Need a crossover for a competitor's product? Call Vaccon for help in choosing an equivalent model. Configure / Purchase
All Mid Series generators incorporate Vaccon’s interchangeable venturi cartridge system that allows designers to choose from 11 different cartridge assemblies to optimize generator performance to meet their specific application needs.
Need a crossover for a competitor's product? Call Vaccon for help in choosing an equivalent model. Configure / Purchase
Features & Benefits
|
![]() VP10 generator shown with optional VSMN-QD-6 vacuum switch |
- Pick & place small part or medium size object
- End-of-Arm-Tooling/Robotic systems
- Packaging
- Vessel evacuation
- Vacuum clamping/holding fixtures
- Sampling for liquid and gas analysis
- Interchangeable venturi cartridges – 11 different performance levels
- Factory installed miniature vacuum switches/sensors with quick disconnect for reliable part detection
- Silencers– ST4 (straight-through) silencer won’t clog, STAA4 silencers for ultra quiet operation
- G port threads for metric machines – an “I” prefix designates products with metric threads
- Choice of operating pressures to meet machine and factory air supply 80 PSI [5.5 bar] standard, 60 PSI [4.1 bar] optiona
Standard Specifications
VP10 Min Series Generator Standard Specifications | |
Generator Material: | Anodized Aluminum (for silencer material see Silencer Page) |
Cartridge Material: | Nylon, Buna O-Ring O-rings available in additional materials - Consult factory for availability |
Medium: | Filtered (50 micron) un-lubricated, non-corrosive dry gases |
Operating Temperature: | -30° to ~250°F [-34° to ~121°C] |
Operating Pressure: | 80 PSI [5.5 bar] or 60 PSI [4.1 bar] – Consult Factory for other operating pressures |
Performance Level Designations:
“L” | 0-10”Hg, [0 to 677mbar] for low vacuum/high flow applications |
“M” | 0-20”Hg, [0 to 677mbar] for medium vacuum/high flow applications |
“H” | 0-28”Hg, [0 to 948mbar] for high vacuum/standard flow applications |
VP10 Mid Series Operating and Installation Requirements
Cartridge Size: | C60 (M, H) and C90 (L, M, H) | C100 (L, M, H) and C150 (L, M, H) |
Supply Line: | 1/4” O.D. [6mm] tube | 3/8” O.D. [10mm] tube |
Vacuum Line: | 1/4” O.D. [6mm] tube | 3/8” O.D. [10mm] tube |
Vacuum Line Filtration: | Typically vacuum filters are not required, if desired Vaccon recommends model VF125LPM (see In-Line Filter Page) | |
Control Valve: | 3 way / 2 position (faster part release), minimum orifice – 0.125 I.D. [3 mm] | |
Mounting Screws: | Mounting holes accept 10-32 [M5] screws |
Dimensional Data
Dimensional data for the VP10 Mid Series modular venturi vacuum generator is presented in 2D drawings, with all critical dimensions and port thread sizes displayed. Both imperial and metric units are included.VP10 Mid Series Venturi Vacuum Generator dimensional data
Performance Data
Performance data for the VP10 Mid Series modular venturi vacuum generator is displayed, listing air consumption, vacuum flow at various vacuum levels, and evacuation times (for 1 cu. ft. or 1 L volumes). Data is presented in tabular and graphed formats, in both imperial and metric units.VP10 Mid Series Venturi Vacuum Generator performance data