Download PDF of this page  Print this page

VP0X / VP0X-ADJ Min Series Fastbreak Miniature Venturi Vacuum Pump

VP0X Min Series venturi vacuum pump with pneumatic blow-off
VP0X & VP0X-ADJ air-powered venturi vacuum pumps are trusted for accurate part placement and rapid part release. The reliable Fastbreak Min Series provides both vacuum and blow-off in one compact pump. Only one compressed air line provides both vacuum and blow-off, with no electricity required.
 
The integrated pneumatic high-speed blow-off on the VP0X pump provides a fixed-duration blow-off, based on the volume of the housing. With the VP0X-ADJ adjustable vacuum pump, you can control the intensity of the blow-off using one fingertip adjustment knob. (Customer-supplied directional control valve with exhaust required.)

Need a crossover for a competitor's product? Call Vaccon for help in choosing an equivalent model. Configure / Purchase

Features & Benefits

  • Fast Response – compact, lightweight and installs close to vacuum point
  • Efficient – minimal air consumption
  • Reliable – operates trouble-free:
    • Straight-through design, non-clogging
    • No moving parts to wear or clog
    • No flap valves to stick open
    • Automatically cleans vacuum lines
    • No maintenance, no downtime
VP0X-ADJ pump shown with optional VSMP-QD-6 vacuum switch
Ideal Applications
  • Small part pick & place for applications requiring accurate part placement and rapid part release:
    • Integrated circuits
    • Packaging machines
    • High speed labeling machines
    • Sheet feeders
    • Robotic end effectors
    • Automated assembly
Pump Options
  • ADJ version allows the user to set the intensity of the blow-off from no blow-off to full blow-off
  • Factory installed miniature vacuum switches or sensors with quick disconnect for reliable part detection
  • ST2 (straight–through) silencer allows ingested debris to exit the pump without clogging
  • G port threads for metric machines – an “I” prefix designates products with metric threads
  • Choice of operating pressures to meet machine and factory air supply 80 PSI [5.5 bar] standard, 60 PSI [4.1 bar] optional

Standard Specifications

VP0X / VP0X-ADJ Min Series Pump Standard Specifications
Pump Material: Anodized Aluminum, Nebar, Brass, Buna-N, Vinyl, Nylon, Alloy Steel
(for silencer material see Silencer Page
Cartridge Material: Nylon, Buna O-Ring
O-rings available in additional materials - Consult factory for availability
Medium: Filtered (50 micron) un-lubricated, non-corrosive dry gases
Operating Temperature: 32° to ~125°F [0° to ~52°C]
Operating Pressure: 80 PSI [5.5 bar] or 60 PSI [4.1 bar] – Consult Factory for other operating pressures
Cycle Rates: Up to 900/min
Blow-off Response Time: Instantaneous
Orientation: Any position
Blow-off Duration: 100 milliseconds (based on system design)
 
Performance Level Designations:
M 0-20”Hg, [0 to 677mbar] for medium vacuum/high flow applications
H 0-28”Hg, [0 to 948mbar] for high vacuum/standard flow applications
 
VP00 Min Series Operating and Installation Requirements
Cartridge Size: CM60 (M or H)
Supply Line: Min. 5/32” [4mm], 1/4” O.D. [6mm] tube preferred for lines exceeding 3’ [1M]
Control Valve: 3 way/2 position, minimum orifice - 0.093” diameter [2.5mm]
Vacuum Line: 1/4” [6mm] tube preferred, for short runs 5/32” [4mm] may be used
Vacuum Line Filtration: Typically vacuum filters are not required, if desired Vaccon recommends model VF125LPM (see In-Line Filter Page)
Mounting: Mounting holes accept 4-40 or M3 screws

Dimensional Data

Dimensional data for the VP0X & VP0X-ADJ series venturi vacuum pump is presented in 2D drawings, with all critical dimensions and port thread sizes displayed. Both imperial and metric units are included.

VP0X Min Series dimensional data 



 

Performance Data

Performance data for the VP0X Min Series venturi vacuum pump is displayed, listing air consumption, vacuum flow at various vacuum levels, and evacuation times (for 1 cu. ft. or 1 L volumes). Data is presented in tabular and graphed formats, in both imperial and metric units.

VP0X Min Series Performance Data 

 
 
Catalog
3D Cad Files
Custom Products
News
Videos