Download PDF of this page  Print this page

VP2X & VP2X-ADJ / VP2XBV & VP2XBV-ADJ Mid Series Fastbreak Venturi Vacuum Pump

VP2XBV-ADJ mid series venturi vacuum pump with ST4 silencer and SX-4 switch
VP2X Series air-powered venturi vacuum pumps are trusted for accurate part placement and rapid part release. The reliable Fastbreak Mid Series provides both vacuum and blow-off in one pump, using only one compressed air line. No electricity required.
 
The integrated pneumatic high-speed blow-off on the VP2X pump provides a fixed-duration blow-off, based on the volume of the housing. With the VP2X-ADJ adjustable vacuum pump, you can control the intensity of the blow-off using one fingertip adjustment knob. (Customer-supplied directional control valve with exhaust required).
 
VP2XBV and VP2XBV-ADJ pumps offer an optional 2-way integrated valve. For applications where you need to control the duration of the blow-off, please see the VP35 Series page.

Need a crossover for a competitor's product? Call Vaccon for help in choosing an equivalent model. Configure / Purchase

Features & Benefits

  • Fast Response – compact, lightweight and installs close to vacuum point
  • Efficient – minimal air consumption
  • Reliable – operates trouble-free:
    • Straight-through design, non-clogging
    • No flap valves to stick open
    • Automatically cleans vacuum lines
    • No maintenance
    • No downtime
  • High productivity – rapid part release, cycle rates up to 900/min
  • Modular design – add vacuum sensors and solenoid valves to create a complete vacuum system
  • Multiple functions from just one PLC output – requires fewer outputs, less costly, easy to program
  • Reliable part detection – factory installed miniature vacuum switches or sensors


VP2X-ADJ pump shown with optional SX-4 mechanical vacuum switch
and valve
Ideal Applications
  • Pick & place for applications requiring accurate part placement and rapid part release
    • Palletizing
    • Packaging machines
    • High speed labeling machines
    • Sheet feeders
    • Robotic end effectors
    • Automated assembly
Pump Options
  • ADJ version allows the user to set the intensity of the blow-off from no blow-off to full blow-off
  • Interchangeable venturi cartridges – 11 different performance levels
  • 2-way Integrated valve - 24VDC, normally closed
  • Factory-installed miniature vacuum switches or sensors with quick disconnect for reliable part detection
  • Silencers – ST4 (straight-through) silencer won’t clog, or STAA4 silencers for ultra quiet operation
  • G port threads for metric machines – an “I” prefix designates products with metric threads
  • Choice of operating pressures to meet machine and factory air supply 80 PSI [5.5 bar] standard, 60 PSI [4.1 bar] optional

Standard Specifications

VP2X & VP2X-ADJ / VP2XBV & VP2XBV-ADJ Mid Series Pump Standard Specifications
Pump Material: Anodized Aluminum, Nebar, Brass, Buna-N, Vinyl, Nylon, Alloy Steel
(for silencer material see Silencer Page)
Cartridge Material: Nylon, Buna O-Ring
O-rings available in additional materials - Consult factory for availability
Medium: Filtered (50 micron) un-lubricated, non-corrosive dry gases
Operating Temperature: 32° to ~125°F [0° to ~52°C]
Operating Pressure: 80 PSI [5.5 bar] or 60 PSI [4.1 bar] – Consult Factory for other operating pressures
Cycle Rates: Up to 900/min
Blow-off Response Time: Instantaneous
Orientation: Any position
Blow-off Duration: 100 milliseconds (based on system design)
 
Performance Level Designations:
L 0-10”Hg, [0 to 339mbar] for low vacuum/high flow applications
M 0-20”Hg, [0 to 677mbar] for medium vacuum/high flow applications
H 0-28”Hg, [0 to 948mbar] for high vacuum/standard flow applications
 
VP2XBV / VP2XBV Optional 2-Way Valve Specifications
Valve Type: Axial 2-Way Solenoid Valve, Normally closed
Valve Body Material: Aluminum, Buna-N Brass, Aluminum, Buna-N
Valve Operating Pressure: Vacuum to 120 PSI [-1 to 8 bar]
Electrical: 24 VDC [-15% to +10% Nominal]
Power Consumption: 4 watts
Response Time: 6 milliseconds
Cycle Rate: 80 cycles/second
Average Life: 100 million cycles
Electrical Connection: Fixed leads, 24 AWG, 18” [457.2mm], optional M8 3-pin connector
LED Indicator: Yes
M8 3-pin Connection: Yes, optional
   
VP2X / VP2XBV /VP2XBV-ADJ / VP2X-ADJ Mid Series Operating and Installation Requirements
Cartridge Size: C60 (M, H) and C90 (L, M, H) C100 (L, M, H) and C150 (L, M, H)
Supply Line: 1/4” O.D. [6mm] tube 3/8” O.D. [10mm] tube
Vacuum Line: 1/4” O.D. [6mm] tube 3/8” O.D. [10mm] tube
Vacuum Line Filtration: Typically vacuum filters are not required, if desired Vaccon recommends model VF125LPM for the VP2X/VP2XBVand model VF250LPM for the VP1X/VP2XBV-ADJ (see In-Line Filter Page)
Control Valve: 3 way / 2 position (faster part release), minimum orifice – 0.125 I.D. [3 mm]
Mounting Screws: Mounting holes accept 4-40 [M3] screws

Dimensional Data

Dimensional data for the VP2X/2XBV & VP1X/2XBV-ADJ Mid Series venturi vacuum pumps is presented in 2D drawings, with all critical dimensions and port thread sizes displayed. Both imperial and metric units are included.

VP2X / VP2X-ADJ / VP2XBV / VP2XBV-ADJ Mid Series dimensional data 


 

Performance Data

Performance data for the VP1X & VP1X-ADJ Mid Series venturi vacuum pump is displayed, listing air consumption, vacuum flow at various vacuum levels, and evacuation times (for 1 cu. ft. or 1 L volumes). Data is presented in tabular and graphed formats, in both imperial and metric units.

VP2X & VP2X-ADJ / VP2XBV & VP2XBV-ADJ Mid Series Performance Data 



 
Catalog
3D Cad Files
Custom Products
News
Videos