VP8X & VP8X-ADJ / VP8XBV & VP8XBV-ADJ Max Series Fastbreak Venturi Vacuum Pump
VP8X & VP8X-ADJ and VP8XBV & VP8XBV-ADJ air-powered venturi vacuum pumps are trusted for accurate part placement and rapid part release. The reliable Fastbreak Max Series provides both vacuum and blow-off in one pump, using only one compressed air line. No electricity required.
The integrated pneumatic high-speed blow-off on the VP8X and VP8XBV pumps provide a fixed-duration blow-off, based on the volume of the housing. With the VP8X-ADJ and VP8XBV-ADJ adjustable vacuum pumps, you can control the intensity of the blow-off using one fingertip adjustment knob. (Non-BV versions require customer-supplied directional control valve with exhaust.) The VP8XBV pumps offer an integrated valve for increased production cycles.
VP8XBV and VP8XBV-ADJ pumps offer an optional 2-way integrated valve.
Need a crossover for a competitor's product? Call Vaccon for help in choosing an equivalent model. Configure / Purchase
The integrated pneumatic high-speed blow-off on the VP8X and VP8XBV pumps provide a fixed-duration blow-off, based on the volume of the housing. With the VP8X-ADJ and VP8XBV-ADJ adjustable vacuum pumps, you can control the intensity of the blow-off using one fingertip adjustment knob. (Non-BV versions require customer-supplied directional control valve with exhaust.) The VP8XBV pumps offer an integrated valve for increased production cycles.
VP8XBV and VP8XBV-ADJ pumps offer an optional 2-way integrated valve.
Need a crossover for a competitor's product? Call Vaccon for help in choosing an equivalent model. Configure / Purchase
Features & Benefits
|
![]() VP8X-ADJ pump shown with optional
valve with M8 connector |
Ideal Applications
- Pick & place for applications requiring accurate part placement and rapid part release:
- Palletizing
- Packaging machines
- High speed labeling machines
- Sheet feeders
- Robotic end effectors
- Automated assembly
- ADJ version allows the user to set the intensity of the blow-off from no blow-off to full blow-off
- Integrated 2-way valve - 24 VDC, normally closed, with optional M8 3-pin connector
(BV valve assembly not available in the "250-H" version) - Factory-installed miniature vacuum switches or sensors with quick disconnect for reliable part detection
- FA-51-3/8 silencer for high flow applications, STAA6 hybrid silencer for ultra-quiet operation for ultra quiet operation
- G port threads for metric machines – an “I” prefix designates products with metric threads
- Choice of operating pressures to meet machine and factory air supply 80 PSI [5.5 bar] standard, 60 PSI [4.1 bar] optional
Standard Specifications
VP8X & VP8X-ADJ / VP8XBV & VP8XBV-ADJ Max Series Pump Standard Specifications | |
Body Material: | Anodized Aluminum, Nebar, Brass, Buna-N (ADJ pump only), Vinyl, Nylon, Alloy Steel (for silencer material see Silencer Page) |
Medium: | Filtered (50 micron) un-lubricated, non-corrosive dry gases |
Operating Temperature: | 32° to ~125°F [0° to ~52°C] |
Operating Pressure: | 80 PSI [5.5 bar] or 60 PSI [4.1 bar] – Consult Factory for other operating pressures |
Cycle Rates: | Up to 900/min |
Blow-off Response Time: | Instantaneous |
Orientation: | Any position |
Blow-off Duration: | 100 milliseconds (based on system design) |
Performance Level Designations:
“L” | 0-10”Hg, [0 to 339mbar] for low vacuum/high flow applications |
“M” | 0-20”Hg, [0 to 677mbar] for medium vacuum/high flow applications |
“H” | 0-28”Hg, [0 to 948mbar] for high vacuum/standard flow applications |
VP8XBV / VP8XBV Optional 2-Way Valve Specifications
Valve Type: | Axial 2-Way Solenoid Valve, Normally closed |
Valve Body Material: | Brass, Aluminum, Buna-N |
Valve Operating Pressure: | Vacuum to 120 PSI [-1 to 8 bar] |
Electrical: | 24 VDC [-15% to +10% Nominal] |
Power Consumption: | 4 watts |
Response Time: | 6 milliseconds |
Cycle Rate: | 80 cycles/second |
Average Life: | 100 million cycles |
Electrical Connection: | Fixed leads, 24 AWG, 18” [457.2mm], optional M8 3-pin connector |
LED Indicator: | Yes |
M8 3-pin Connection: | Yes, optional |
VP8X / VP8X-ADJ / VP8XBV / VP8XBV-ADJ Max Series Operating and Installation Requirements
Supply Line: | 3/8” O.D. [10mm] tube recommended |
Vacuum Line: | 3/8” O.D. [10mm] tube recommended |
Control Line: | 3 way / 2 position |
Vacuum Line Filtration: | Typically vacuum filters are not required, if desired Vaccon recommends model VF375F (see In-Line Filter Page) |
Mounting: | Mounting holes accept 10-32 or M5 screws |
Dimensional Data
Dimensional data for the VP8X/8XBV & VP8X/8XBV-ADJ Max Series venturi vacuum pumps is presented in 2D drawings, with all critical dimensions and port thread sizes displayed. Both imperial and metric units are included.VP8X &VP8X-ADJ / VP8XBV & VP8XBV Max Series dimensional data
Performance Data
Performance data for the VP8X/8XBV & VP8X/8XBV-ADJ Max Series venturi vacuum pump is displayed, listing air consumption, vacuum flow at various vacuum levels, and evacuation times (for 1 cu. ft. or 1 L volumes). Data is presented in tabular and graphed formats, in both imperial and metric units.Venturi Max Series performance data