Download PDF of this page  Print this page

VP00 Min Series Modular Venturi Vacuum Pump

Vaccon VP00 Modular Venturi Vacuum Pump
The VP00 Min Series air-powered venturi vacuum pumps are highly efficient, capable of reaching 28"Hg [948mbar], and dirt tolerant. The VP00s use minimal compressed air and include a silencer for quiet operation. Lightweight and compact, they easily mount close to the vacuum point for fast response.  
 
Designed for point-of-use installation - The VP00 Series vacuum pumps offer a high vacuum venturi in several compact, lightweight configurations that are ideal for small part pick and place applications. Other common applications include fast evacuation of small vessels for purging operations and water/air analyzers. These compact pumps require little installation space and can be positioned close to the vacuum point for fast response.

Need a crossover for a competitor's product? Call Vaccon for help in choosing an equivalent model. Configure / Purchase
 
Features & Benefits
  • High Productivity – powerful vacuum up to 28”Hg [948mbar]
  • Mounts Easily – square body, compact and lightweight
  • Fast Response – installs close to vacuum point
  • Efficient – minimal air consumption
  • Reliable – operates trouble-free:
    • Straight-through design, non-clogging
    • No moving parts to wear or clog
    • No flap valves to stick open
    • No maintenance
    • No downtime
Ideal Applications
  • Small part pick & place
  • Integrated circuit handling
  • Small vessel evacuation
  • Sampling for liquid and gas analysis


VP00 pump shown with optional VSMN-QD-6 vacuum switch
Pump Options
  • Factory installed miniature vacuum switches or sensors with quick disconnect for reliable part detection
  • ST2 (straight–through) silencer allows ingested debris to exit the pump without clogging
  • G port threads for metric machines – an “I” prefix designates products with metric threads
  • Choice of operating pressures to meet machine and factory air supply 80 PSI [5.5 bar] standard, 60 PSI [4.1 bar] optional

Standard Specifications

VP01BV Pump Standard Specifications
Pump Material: Anodized Aluminum (for silencer material see Silencer Page)
Cartridge Material: Nylon, Buna O-Ring
O-rings available in additional materials - Consult factory for availability
Medium: Filtered (50 micron) un-lubricated, non-corrosive dry gases
Operating Temperature: -30° to ~250°F [-34° to ~121°C]
Operating Pressure: 80 PSI [5.5 bar] or 60 PSI [4.1 bar]- Consult Factory for other operating pressures
 
Performance Level Designations:
M 0-20”Hg, [0 to 677mbar] for medium vacuum/high flow applications
H 0-28”Hg, [0 to 948mbar] for high vacuum/standard flow applications
 
VP00 Min Series Operating and Installation Requirements
Supply Line: Min. 5/32” [4mm], 1/4” O.D. [6mm] tube preferred for lines exceeding 3’ [1M]
Control Valve: 3 way (faster part release), minimum orifice - 0.062” diameter [1.57mm]
Vacuum Line: 1/4” [6mm] tube preferred, for short runs 5/32” [4mm] may be used
Vacuum Line Filtration: Typically vacuum filters are not required, if desired Vaccon recommends model VF125LPM (see In-Line Filter Page)
Mounting: Mounting holes accept 4-40 or M3 screws

Dimensional Data

Dimensional data for the VP00 series venturi vacuum pump is presented in 2D drawings, with all critical dimensions and port thread sizes displayed. Both imperial and metric units are included.

VP00 Min Series Venturi Vacuum Pump dimensional data 

 

 

Performance Data

Performance data for the VP00 series venturi vacuum pump is displayed, listing air consumption, vacuum flow at various vacuum levels, and evacuation times (for 1 cu. ft. or 1 L volumes). Data is presented in tabular and graphed formats, in both imperial and metric units.

VP00 Min Series Venturi Vacuum Pump performance data 

 
 
Catalog
3D Cad Files
Custom Products
News
Videos