Download PDF of this page  Print this page

VP01BV Series Solenoid Controlled Modular Venturi Vacuum Pump

VP01 Modular Venturi Vacuum Pump with Integrated Solenoid Control Valve
VP01BV Min Series pumps are solenoid-controlled miniature venturi vacuum pumps that generate vacuum only when needed, minimizing compressed air consumption. The integral solenoid valve provides instantaneous response for high speed assembly and pick & place applications.
 
Lightweight and compact, VP01BV pumps are placed directly at the point of use to eliminate plumbing between components and to ensure high cycle rates for increased productivity. Dirt tolerant, vacuum filters are not required. Add a Vaccon ultra-miniature vacuum switch or sensor for a vacuum achieved/part present signal.

Need a crossover for a competitor's product? Call Vaccon for help in choosing an equivalent model. Configure / Purchase
Features & Benefits
  • High productivity – Cycle rates up to 4800/min for fast part release
  • Minimal air consumption – provides instantaneous vacuum as needed
  • Reliable part detection – factory-installed miniature vacuum switches or sensors
  • Fast Response – installs close to vacuum point – no delay due to long plumbing lines
  • Easy installation – modular design speeds installation and minimizes assembly
  • Reliable – operates trouble-free:
    • Straight-through design, non-clogging
    • No moving parts to wear or clog
    • No flap valves to stick open
    • No maintenance
    • No downtime
VP01BV pump shown with optional VSMP-QD-6 vacuum switch and
M8 valve connector
Ideal Applications

Small part pick & place for applications requiring accurate part placement:
  • Automated Assembly
  • Robotics
  • Material Handling
Pump Options
  • Factory installed miniature vacuum switches or sensors with quick disconnect for reliable part detection
  • ST2 (straight–through) silencer allows ingested debris to exit the pump without clogging
  • G port threads for metric machines – an “I” prefix designates products with metric threads
  • Choice of operating pressures to meet machine and factory air supply 80 PSI [5.5 bar] standard, 60 PSI [4.1 bar] optional
  • M8 3-pin connector

Standard Specifications

VP01BV Pump Standard Specifications
Pump Material: Anodized Aluminum (for silencer material see Silencer Page)
Cartridge Material: Nylon, Buna O-Ring
O-rings available in additional materials - Consult factory for availability
Medium: Filtered (50 micron) un-lubricated, non-corrosive dry gases
Operating Temperature: 0° to ~122F [-18° to ~65°C]
Operating Pressure 80 PSI [5.5 bar] or 60 PSI [4.1 bar]– Consult Factory for other operating pressures
 
VP01BV Optional 3-Way Valve Specifications
Valve Type: Base Mounted 3-Way, Solenoid Valve, Normally closed
Valve Body Material: Brass, Aluminum, Buna-N
Valve Operating Pressure: Vacuum to 120 PSI [-1 to 8 bar]
Electrical: 24 VDC [-15% to +10% Nominal]
Power Consumption: 4 watts
Response Time: 6 milliseconds
Cycle Rate: 80 cycles/second
Average Life: 100 million cycles
Electrical Connection: Fixed leads, 24 AWG, 18” [457.2mm], optional M8 3-pin connector
LED Indicator: Yes
Manual Override: Yes, non-locking, spring return
M8 3-pin Connection: Yes, optional
 
Performance Level Designations:
M 0-20”Hg, [0 to 677mbar] for medium vacuum/high flow applications
H 0-28”Hg, [0 to 948mbar] for high vacuum/standard flow applications
 
VP01BV / VP01BV Mid Series Operating and Installation Requirements
Supply Line: 1/4” O.D. [6mm] tube recommended
Vacuum Line: 1/4” O.D. [6mm] tube preferred
Vacuum Line Filtration: Typically vacuum filters are not required, if desired Vaccon recommends model VF125LPM (see In-Line Filter Page)
Mounting: Mounting holes accept 4-40 or M2 screws

Dimensional Data

Dimensional data for the VP01BV solenoid controlled venturi vacuum pump is presented in 2D drawings, with all critical dimensions and port thread sizes displayed. Both imperial and metric units are included.

VP01BV Series Venturi Vacuum Pump dimensional data

 
 

Performance Data

Performance data for the VP01BV solenoid controlled venturi vacuum pump is displayed, listing air consumption, vacuum flow at various vacuum levels, and evacuation times (for 1 cu. ft. or 1 L volumes). Data is presented in tabular and graphed formats, in both imperial and metric units.

VP01BV / VP01BV Min Series Venturi Vacuum Pump performance data 

 
 
Catalog
3D Cad Files
Custom Products
News
Videos