Home » Standard Products » Venturi Vacuum Pumps (VP, RTM & J Series) » Inline Venturi Vacuum Pumps » I-MPVG Series Inline Venturi Vacuum Pumps

New! I-MPVG Series Inline Miniature Plastic Vacuum Generator

Vaccon’s I-MPVG Series of miniature plastic vacuum generators are lightweight, high performance up to 27"Hg [918mbar] and offer easy point-of-use installation. These single-stage venturi pumps offer a simple compact design and are the same size as the air supply and vacuum lines allowing installation in the tightest spaces. The I-MPVG-B and I-MPVG-T models contain a built-in silencer. All I-MPVG Series pumps are metric only.

The I-MPVG Series feature a single-stage design with no moving parts to wear out. Vaccon dirt tolerant pumps don’t require costly filters or screens to maintain their maintenance-free operation, eliminating downtime and increasing productivity. Simply supply compressed air and vacuum lines to the pump – push-to-connect fittings provide quick and simple connections.

Need a crossover for a competitor's product? Call Vaccon for help in choosing an equivalent model. Configure / Purchase

Features & Benefits

Lightweight and compact for easy point-of-use installation
Integrated mounting holes
Built-in silencers
Push-to-connect fittings [6mm] speed installation
Fast response – installs close to vacuum point
Efficient – minimal air consumption
Safe operation – no electricity needed at the pump
Reliable – operates trouble-free:
- No moving parts to wear or clog
- No flap valves to stick open
- No maintenance
- No downtime

Ideal Applications

Pick & Place of small to medium sized parts
Robotic End-of-Arm Tooling
Vacuum clamping / holding fixtures
Vessel evacuation
Gas sampling for analysis
Leak testing

Pump Options

3 different models (metric thread only)
Up to 27.1” vacuum level
Up to 1.3 SCFM [39 LPM] vacuum flow
2 different vacuum levels for I-MPVG-B and MPVG-T models
Integral mounting holes (I-MPVG-B and MPVG-T models)
I-MPVG-I-18M vacuum port has G 1/8 threads for installation on End-of-Arm tool or panel mounting

Standard Specifications

I-MVPG Inline Pump Standard Specifications

Pump Material:	Anodized Aluminum, Buna-N O-ring, Nylon
Medium:	Filtered (50 micron) un-lubricated, non-corrosive dry gases
Operating Temperature:	-30° to ~250F [-34° to ~121°C]
Operating Pressure:	72 PSI [5.0 bar]

Performance Level Designations

I-MPVG-B models 27.1”Hg [918mbar] for high vacuum / standard flow applications
I-MPVG-T & I-MPVG-I models 26.8”Hg [908mbar] for high vacuum / standard flow applications

I-MPVG Inline Pump Operating and Installation Requirements

Supply Line:	6mm O.D. tube
Vacuum Line:	6mm O.D. tube
Exhaust Valve:	8mm O.D. tube (I-MPVG-T model only)
Vacuum Line Filtration:	Typically vacuum filters are not required, if desired Vaccon recommends model VF125LPM (see In-Line Filter Page)

I-MPVG-B Inline Venturi Pump

I-MPVG-T Inline Venturi Pump

I-MPVG-I Inline Venturi Pump

I-MPVG-I-18M Inline Venturi Pump

^ Back to Top

Dimensional Data

Dimensional data for the I-MVPG Series Inline Venturi Vacuum Pumps is presented in 2D drawings, with all critical dimensions and port thread sizes displayed. Both imperial and metric units are included.

Inline I-MPVG Series Dimensional Data

^ Back to Top

Performance Data

Performance data for the I-MVPG Series Inline Venturi Vacuum Pumps is presented listing air consumption and maximum vacuum level. Data is presented in both imperial and metric units.

Inline I-MPVG Series Performance Data

^ Back to Top

Vaccon Company, Inc. 9 Industrial Park Road, Medway, MA 02053 vaccon-engineering@bimba.com
Phone: 508-359-7200 800-848-8788 - US Fax: 508-359-0177 Map