Download PDF of this page  Print this page

VP35 Mid Series Venturi Vacuum Pump with Solenoid Operated Vacuum and Blow-off

VP35 Mid Series Venturi Vacuum Pump with Solenoid Operated Vacuum and Blow-off
VP35 Mid Series are solenoid-controlled venturi vacuum pumps that feature a second solenoid to control blow-off air for rapid part release. VP35 pumps generate vacuum only when needed, minimizing compressed air consumption.
 
Our interchangeable venturi cartridge system allows design flexibility. Choosing from 11 different venturi cartridges, designers can optimize performance to meet their needs.
 
Lightweight and compact, VP35 pumps are placed at the point of use to eliminate plumbing between components and to ensure high cycle rates for increased productivity. Dirt tolerant,
vacuum filters are not required. Push-to-connect air supply and vacuum lines save space and assembly time.
 
Need a crossover for a competitor's product? Call Vaccon for help in choosing an equivalent model. Configure / Purchase
Features & Benefits
  • Precise control – individual electrical connections let you control the vacuum and the blow-off duration time
  • Fast response – no delay due to long plumbing lines; installs close to vacuum point
  • Instantaneous vacuum as needed – minimal air consumption
  • High productivity – rapid part release, cycle rates up to 2700/min
  • Easy installation – modular design speeds installation and minimizes assembly
  • Accurate part positioning from positive vacuum and rapid blow-off
  • Reliable – operates trouble-free:
    • Straight-through design, non-clogging
    • No flap valves to stick open
    • Automatically cleans vacuum lines
    • No maintenance, no downtime

VP35 pump shown with optional VTMV-QD-6 vacuum switch and gauge
Ideal Applications 

Pick & place for applications requiring accurate part placement and rapid part release:
  • Robotics
  • Automated assembly
  • Material Handling
Pump Options
  • Interchangeable venturi cartridges – 11 different performance levels
  • Factory-installed miniature vacuum switches or sensors with quick disconnect for reliable part detection
  • ST4 (straight-through) silencer that allows ingested debris to exit the pump without clogging
  • G port threads for metric machines – an “I” prefix designates products with metric threads
  • Choice of operating pressures to meet machine and factory air supply 80 PSI [5.5 bar] standard,
    60 PSI [4.1 bar] optional

Standard Specifications

VP35 Pump Standard Specifications
Pump Material: Anodized Aluminum, Buna-N, Brass, Acetal (for silencer material see Silencer Page)
Cartridge Material: Nylon, Buna O-Ring - O-rings available in additional materials - Consult factory for availability
Medium: Filtered (50 micron) un-lubricated, non-corrosive dry gases
Operating Temperature: -23° to ~122F [-5° to ~50°C]
Operating Pressure: 80 PSI [5.5 bar] or 60 PSI [4.1 bar] – Consult Factory for other operating pressures
 
VP35 Series 2-Way Valve Specifications
Valve Type: Axial 2-Way Solenoid Valve, Normally closed
Valve Body Material: Brass, Aluminum, Buna-N
Valve Operating Pressure: Vacuum to 120 PSI [-1 to 8 bar]
Electrical: 24 VDC [-15% to +10% Nominal]
Power Consumption: 4 watts
Response Time: 6 milliseconds
Cycle Rate: 80 cycles/second
Average Life: 100 million cycles
Electrical Connection: 2-pin connector with fixed leads, 24 AWG, 18” [457.2mm], optional M8 3-pin connector
LED Indicator: Yes
Manual Override: Yes, non-locking, spring return
M8 3-pin Connection: Yes, optional
   
Performance Level Designations:
L 0-10”Hg, [0 to 339mbar] for low vacuum/high flow applications
M 0-20”Hg, [0 to 677mbar] for medium vacuum/high flow applications
H 0-28”Hg, [0 to 948mbar] for high vacuum/standard flow applications
   
VP35 Series Operating and Installation Requirements
Cartridge Size: C60 (M, H) and C90 (L, M, H) C100 (L, M, H) and C150 (L, M, H)
Supply Line: 1/4” O.D. [6mm] tube 3/8” O.D. [10mm] tube
Vacuum Line: 3/8” O.D. [10mm] tube 3/8” O.D. [10mm] tube
Vacuum Line Filtration: Typically vacuum filters are not required, if desired Vaccon recommends model VF250LPM (see In-Line Filter Page)
Mounting Screws: Mounting holes accept 4-40 [M3] screws

Dimensional Data

Dimensional data for the VP35 Mid Series venturi vacuum pumps is presented in 2D drawings, with all critical dimensions and port thread sizes displayed. Both imperial and metric units are included.

VP35 Mid Series dimensional data 

 

 

Performance Data

Performance data for the VP35 Mid Series venturi vacuum pump is displayed, listing air consumption, vacuum flow at various vacuum levels, and evacuation times (for 1 cu. ft. or 1 L volumes). Data is presented in tabular and graphed formats, in both imperial and metric units.

Venturi Mid Series performance data 


 
Catalog
3D Cad Files
Custom Products
News
Videos